Search results

Sbob, its an ds18b20. You can prob check previous versions of ardbir to see versions that have .25 resolution. The mega has plenty of space :)

Hi Tzoon, I flashed the sketches onto some more controllers tonight. I'm planning on starting to put the kits together tonight. But I want to test each board fully for the international orders as its a little harder to replace them :) so hopefully before the end of this week or this weekend.

Do people really need more than 0.5 accuracy for brewing?

bigmac - PM'd you. sluggerdog - I know qldkev put an outlet at the bottom of his 1v recirc rig to make sure there was adequate movement around his elements. It seems like running top-bottom produces a slower flow which may not move the wort around enough. I would recommend looking at his build...

The other option is to reduce the derivative as well if you are stalling out close to temp values.

Hmmm, yeah, unless you start the mash again. Depends on how far through you are. I noticed a similar problem once but caught it in the first stage and adjusted. I haven't tested the settings in the video which is why I commented to test them on your own system :) I personally find it annoying...

Slugger dog, what settings ate you currently using?

Getting close :) Very close I think...

Just go to their main site and do it there. Was a while since I did my last order though. http://www.oringsandmore.com

Here we go: A quick video to show you how to run through set up on your Brauduino Controller. Cheers! https://youtu.be/C_HDUacxeNs Let me know if there is anything else you want to see / know how to do :)

Here we go: A quick video to show you how to run through set up on your Brauduino Controller. Cheers! https://youtu.be/C_HDUacxeNs Let me know if there is anything else you want to see / know how to do :)

Quick Video on how to update the 'sketch' on your Brauduino Controller: https://youtu.be/JzG7AXbyvsU

Quick Video on how to update the 'sketch' on your Brauduino Controller: https://youtu.be/JzG7AXbyvsU

Ok! Here are some wiring videos! Video with James on wiring his controller - https://youtu.be/3qyy9YIK9tA Video about wiring the power connectors - https://youtu.be/zpeHHUmGcak

OK, Thanks for waiting for these - Wiring Videos! :) https://youtu.be/3qyy9YIK9tA https://youtu.be/zpeHHUmGcak I've posted these on both threads as I know a lot of people are subscribed to the buy thread that are not subscribed to the build thread.

Looks like zwitter found the error... it was me, not the software! :) Thanks James!

#3 - If you are using twin and earth for your 240v side, make sure that it is not sticking up too high in the box. Fitting everything in one relatively small box was hard. There is about an inch between the back of the power sockets and the back of the Arduino Mega. If your twin and earth sits...

What is this 'sulfurgate' you speak of?

Mine is wired with 2.5mm flex (rated to 20A) with single crimp on connectors (red) they are wired into a terminal block for splitting etc. I think the way Zwitter and others have done it with daisy chained connectors is neater :)