Search results

gas guyz
shop deals on amazon
Advertise with us
Shop deals on ebay
Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Fermenting Fridge tripping breakers.

    Yes no need for the timer and thermostat. Bypass these and use your STC or what have you to control the compressor cycle. Won't need the defrost cycle as you won't be getting the fridge cold enough for long enough,
  2. C

    Pressure Relief Valve.

    Does the $8 postage cover multiples?
  3. C

    Pressure transfer always slow.

    Spunding valve stuck / blocked?
  4. C

    Just another controller build

    If you have mounted any SSR's to the wood I strongly suggest suggest using a heatsink to get the SSR away from the wood. SSR's have a habit of melting/burning when they fail.
  5. C

    Pressure Relief Valve.

    x3 please
  6. C

    Ongoing Diacetyl ? off flavour

    What about kettle taps? http://brulosophy.com/2014/11/13/problem-identification-or-helping-a-buddy-stay-in-the-hobby/
  7. C

    Ongoing Diacetyl ? off flavour

    When was the last time you cleaned out your taps?
  8. C

    Knead it or Araldite for Mash fitting?

    That thread suggests using it within the thermowell itself. This will have no contact with the wort so won't matter too much what you use - I wouldn't use anything though. A correctly sized probe and thermowell will still allow sufficient heat transfer - and will still mean you can remove /...
  9. C

    Brazing attempt - Have I ruined the pot?

    Cheers for the link! I did get it red hot with the mapp torch - brazing rods were just struggling to get flowing. Probably due to my inexperience though. Pots a few mm thick.
  10. C

    Brazing attempt - Have I ruined the pot?

    Hey guys, First attempt at brazing stainless. Didn't quite go as planned. May have used the wrong brazing rod (nickel & bronze). Has the pot been ruined by too much heat? Still needs fixing - silver solder seems to be what I should have used in the first place?
  11. C

    Fermentasaurus - dry hopping under pressure

    Why not use a magnet and hop bag? When you want the hops to be added to the wort remove the outside magnet and the hop bag will drop down into the wort (add a small weight to make sure the bag sinks).
  12. C

    Huge All Brand New & Unused Brewing Equipment Sale (updated list)

    Brad - Can you confirm the 1-off 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect has been sold?
  13. C

    Huge All Brand New & Unused Brewing Equipment Sale (updated list)

    And 1-off 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect
  14. C

    Huge All Brand New & Unused Brewing Equipment Sale (updated list)

    Can I grab (if still available) - 2 x 1"/1.5" Tri-Clamp Barbed 90deg - $5 each 2 x 1"/1.5" Tri-Clamp Barbed Straight - $3 each 4 x 1"/1.5" Tri-Clamps - $5 each 4 x 1"/1.5" Tri-Clamp Silicone Gaskets - $1 each 4 x 1"/1.5" Tri-Clamp Short Ferrules - $2 each
Back
Top