Search results

Ok guys been reading through this thread and the answer to my question is probably somewhere but I must have missed it. Just about to do my first pressure ferment, I have a fermentasaurus and am going to do an ipa what pressure should I set the prv for and should I do the whole ferment at the...

I had this same issue and posted a thread a couple of weeks ago, solved it by using a flow control inter tap and now store and pour at 12psi.

Check out beerkats mini regs, look the same as ikegger but cheaper I think. Got one of these and seems good. Cheers

Yep poured another few out of it and all good [emoji106], something so simple huh but I learned something so all good. Was my first crack at kegging .

Hi grott, Just pulled the first beer out of it as we speak, so far so good came out with the right amount of carb and head woohoo will try another later and confirm it is all good. Must have been a bit of **** somewhere in the system, thanks for your help so far. Cheers, Mark.

So released pressure from keg and then released again an hour later and excess pressure didn’t come out. Have taken cap off keg and put screw on cap that came with the keg back on and stripped the posts and tap and disconnect and soaked in sodium perc to clean, blew everything out with...

Thanks grott will try the carbonation and post later

Hi grott Thanks for your reply, pretty sure reg is accurate it’s a brand new kk mk3 and I tried a mini reg too and that read same pressure. Have tried method you suggested and still really foamy and flat. Re tried it using a plastic picnic tap with about 500mm of line and still foam, I have been...

Ok, so purchased a flow control inter tap on the weekend, got home and got all excited to connect it up and pour a good beer ! Guess what foamy beer so I opened the prv and released the pressure and reset the reg from 12psi to 10psi and left it overnight and tried again, still pouring foam. Now...

IBS-TH1 looks the goods :-)

Thanks again for the input, I will get a flow control tap. Shame I wasted a **** load of beer in the meantime haha.

Thanks for your replies guys, tried pouring at lower pressure and there is a definite improvement but still some foaming also did try cutting down and lengthening the dip tube with no improvement. Read a bit about balanced systems and flow control devices over the past few days and as you guys...

Hi there, New to this forum and would appreciate some help. Just started giving kegging my beer a crack had been bottling up to this stage so thought I would try one of the 8l beerkat mini kegs as at this stage room is an issue as I don’t have a designated keg fridge. As the title suggests all...