Search results

If it’s the temp you are worried about then yes, to sterilise the wort chiller they say to pump the wort through it with the pump immediately the boil is finished which would be just under 100 deg so 80 shouldn’t be an issue.

The silicon hose supplied does slip over the original short dip tube, I have it set up like that on my fermentasaurus and never slips off. Cheers.

Item 2 would be cool

Is the cask made of pet ? Pretty sure the manufacturers say if you drill the hole it voids any pressure warranty.

Pretty sure if you fit the racking arm you can’t use it for pressure fermenting as fitting the racking arm means drilling a hole in the vessel.

When I was bottling I would remove a small amount of the beer from the fermenter and heat and mix dextrose in that and return to fermenter and mix in, the rest of the process with the fermentasaurus you’re on the money.

Great idea, can you post the eBay seller and parts list for the stainless bits. Cheers

Google mash out perth, he is in wangara brewcraft is a little expensive. Cheers.

There is a right way up for the seal and a wrong way, there is a lip on the inside edge of the seal which sits inside the neck of the fermenter and this stops the seal pushing out and deforming. Not saying that you are not putting it the right way up but just a thought as mine seals first time...

Plywood looks great with just clear on it, try it on an off cut.

I did have probs initially but found that I wasn’t tightening the collar enough and by giving it that extra 1/4 of a turn I can hold 15 psi no probs, I’ve had it up to 25 psi without leaks aswell.

Hey Stefan, Don’t think there’s much down that part of the world, closest quality homebrew supply would be twoc in Bibra lake of bulk brewing supplies in yangebup, twoc has the better range. Cheers.

Hey rob, Is the disc code ebay10off ?

Ooohhh nice meat and great beer! I’m up for them.

No probs, like I said I’m a newbie here and still have a lot to learn about all grain, a constructive answer would have been appreciated. Cheers Mark

Wtf, being a knob gets you no votes. We all start somewhere and just because I have less knowledge than you shouldn’t mean you have to be a smart ***. I’ll bet you started as a rookie dumbo too. If you have nothing constructive to say shut the **** up. Enough said by me.

Hey dan Did you cold crash that neipa? Don’t want to loose the murkiness that is characteristic of this style. Cheers Nark

I’d question the need for an adaptor, I’ve screwed one of these directly into a bsp brass female tee piece with no issues. If we were talking high pressure then an adaptor would be needed but at 30 psi max no issues.

Can’t take liquid as carry on anyway unless it’s duty free, just pack it up in the middle of your suitcase and cross your fingers.

? Can someone elaborate what this stands for