Search results

good to see other 100L elec builds happening with flashy brewhardware.com gear! I'm in a very similar position, 1V 100L elect recirc and from other threads on AHB the consideration around placement of three things is important - where your tap, temp probe and element are located to get the most...

ended up getting the brewman kit, seems like a pretty easy and economic way to start mainlining 02 into that damn wort.

if only they sold a few snags as well the could have spawned the legend of the deep northern foodtruck speakeasy

Thanks Mardoo appreciate the kind offer. I should be right with the Q-Max punches, fingers crossed the pilot holes will be the same!

thanks for the replies fellas - much appreciated! $22 and $35 for the Q Max punches - I'll go that with! Pretty sure I've already got a carbide bur on my dremel to finish off the job.

Hi All, So I need to drill 2 different holes in my (cheekypeak) SS pot. 2 x hole for a 1.5 inch triclover ferrule: https://www.brewhardware.com/product_p/tc15rsf.htm. The hole needs to be between 34.9mm and 41.2mm. 3 x hole for pull through bulkhead...

alot pricier and need more ampage but a very slick unit - element with 1.5inch TC (tri clover): https://www.brewhardware.com/product_p/element5500_ripple_tc.htm there's lower wattage optoins too, brewhardware also do DIY soldered TC flanges. Don't expect any bargains or cheap shipping however.

saw these blokes on satdee avo at The Tote, funny as, no punches were pulled and straight ahead when it needs to be done! Clip features lots of beer! last record produced by the Off! front man, responsible for great pisstakes like this: https://www.youtube.com/watch?v=x_uWw7DJsiQ

ended up getting the brewhardware gear after all, they have all the kit, couldn't justify spending any more $ and the 1.5 TC will match my SS Brewtech gear if I ever bling it up. 2 x solderable tri clover flange & element cover : https://www.brewhardware.com/product_p/etc4s.htm + spare TC blank...

i should follow my own topic for replies! the schrader valve with the thread is a really neat idea! I've discovered that trying to fill the growler via the QD fitting is still prone to fizzing so I don't need the liquid line in - I now use my SS intertap flow control with growler filler...

last purchase of course! just got my Intertap SS flow control taps with the growler filler attachments! never had flow control before, geeze, will makes filling, along with taking a sip while still force carbing possible! the grain mill is still the one that really gives me the freedom to...

respect to Dead Kelly and Danny Walsh Banned!

Out of respect, I wore The Legend of Borry tshirt in the MCC Members on grand final day. KENO is also an epic song!

nice build - very neat! Ddidn't realise this thread existed and looking at your design and thinking I seem to have channelled some of the same ideas just with a bigger pot! I would have attributed them to you if I knew! funny that I was going to source the same spray nozzle - that took me ages...

Ha! Yeah, those are also good options I was looking at but by the time you get the guard, clamps + weldless TC fitting in Oz you're pretty much covered the ones from the states. My camco elements are also NPS so the brewershardware one also makes it literally a good fit. But fk me, postage from...

Most of the decent wattyl in bigger sizes is gone (ID range @10-15L) from my store. A shedload of Pascol and the pricier Valspar still there however.

what a rabbit hole, a few people have bitched about the build quality on the above item, now this one seems to be the ducks guts: http://www.brewershardware.com/TC15F10NPSCOV.html. The 1.5 TC is a versatile spec that SSBrewtech also use if you have any of their gear.