Search results

I would also love a lower profile disconnect, bought a 4L mini keg and with the tapping head and disconnect, its about 5mm too big to fit in my main kitchen fridge and thats with a shelf already taken out and for some stupid reason the posts on the head aren't interchangeable.

I don't need one just yet, bought one of the older ones it should do me for a while. Also when are your CO2 regulators back in stock? the website said they were supposed to come back today but now has no return date.

Maybe they buggered up and meant 25th July 2021. This seems to be one of those perpetually delayed items, iv'e got this item on my mailing list and got an email a couple of weeks ago saying it was in stock, but checked and said it was delayed until the 24th.

What was the inner diameter of your line? iirc the larger the diameter the longer the line needs to be.

A question about calibration? can i use a brew and get readings with a hydrometer for the polynominal formula?

Yes, i took too much off mine and had to put a couple of strips of duct tape back on fill it out. Get a big piece of sandpaper and go two passes on each side and it should only take maybe 2 go's to get it in.

I was about to ask the same thing, i made an order on Saturday morning, normally they pack it within a couple of hours (even on a saturday) and ships out monday and get it the next day.

This is what i was thinking, looks like they may have over tightened the handle and caused some hairline cracks which pressure fermenting probably exacerbated.

I would disconnect the gas line and put a little bit more pressure in the donor keg then release a little pressure in the receiver should get the beer flowing. Maybe reconnect the gas line once the beer is moving.

Ha, thats funny, apparently Karina has no complaints about the 3000psi burst disc she ordered but only rated it 3 stars. Some products do by the looks have legit reviews but it looks like most are fake.

From the looks of it, they are nearly exactly the same bar a few small things, different screen, software and the BZ has a recirc pump.

From the little use i have had out of it, it doesn't seem too bad, no idea of prolonged use though, i'll probably still get 360 core once they are readily available, i plan to upgrade my CO2 bottle to a 6kg and i can use the old one as a regulator for the 2.6kg bottle.

Is this the 360 core regulator? i wanted that and was about to buy it so i can finally use my mini keg until the last delay put it back 5 weeks and just bought the mini reg.

Does the redesign apply to the stainless steel ones? the one i used was brand new, only had a spray of stellersan and its used as a gas post so no hop or beer residue got into it.

@KegLand-com-au Are the poppets in the stainless steel carb cap replaceable? i bought a couple of caps a few weeks ago now and first time i used one, there is a slight leak, probably a dodgy o-ring, it happens. I have a few new poppets in a corny keg kit i bought ages ago, would be easier...

The calibration instructions i got with my iSpindel which i bought from @bee2gee said to put it in 20°C water and adjust the unit until it sits at around 25° which i did right before i put it into my Fermzilla AR. Brewfather lets you adjust the offset so i put it at 1.048 and now the few hours...

Has anyone had this problem, i am using mine for the first time today in a brew and even though i have calibrated it correctly (it sat near on perfectly at 25° in clean 20°C water) but when i put it in the fermenter its reading nearly 20 points higher than the hydrometer and refrac reading i...

The same way i guess, instead of a jumper with 2 liquid disconnects, one liquid and the tube going straight into the duotight connection, take the tube out either put your pluto gun in or tap. To be honest i didn't spend too much time thinking about it. Or another quick thought, the posts are 2...

I like that tapping head though its nice and solid, i would make it so that the posts and prv are interchangeable, maybe getting rid of the disconnects altogether and going for straight duotight connector incorporated into the tapping head.

@KegLand-com-au Is there a particular reason the posts on the mini keg tapping head aren't interchangeable? although its my own fault for not measuring my indoor fridge but with a 4L mini keg, the liquid disconnect its about 5mm too tall and hits the shelf above. I tried to swap the liquid and...