Search results

Why thank you. I'll give it a good rub soon [emoji23][emoji23][emoji23]

As long as she brewes good beer and I can repeat it ill be very happy. I got the holesaw man. Thanks so much. I'll let you know how I go and document how I do it. Drilling a hole sounds trivial but in a stainless pot there is a little more to think about. I mean I can't clamp it how I would...

Panel is done. Just waiting for the xlr s still for 2 float switches and all the sare ones for future temp probes for the glycole system. I'll be running 2 Ss brewtech unitanks eventually. Also started on the elements. The braided Polly was a ***** to get on and a couple were to bloody short...

I'm asking my mate. See what he can get.

Yeah up to 100 amps but most are from 250 to 600 bucks. You can just use 3 phase plug and receptacle as well but they are also expensive. I'm thinking of just going with this though.

I'm trying to find a 60amp receptacle so I can plug the thing in and get it up and running. Proving to be difficult to find anything under $250. Might just have to hard wire it in with an on off switch or something

The main house rcd is 80amps with a 16mm2 cable cominging in. If that fails there is a fuse from house to power lines basically. Then I've connected the new 62amp rcd to the suboard in picture. I could have got away with 10mm2 cable but I just went with 16mm2 to be sure. Then in the brew panel...

Thanks man. I've enjoyed it. I think I would have run the cables in a different way on the door but they didn't send me anywhere near enough of some cables. I actually had to buy a heap more but couldn't get the same colors. Anyway I just hope she starts up with no problems. Should be all good.

All done. No person was hurt or injured in these photos. Sent a few pics to lecy mates and they approve [emoji5]

Right. Got the 63a rcd and 16mm cable. That **** is big. It's going to be a ***** running that down the wall.

Did a bit of tidying up. Going to run the cable in the roof tomorrow and out the 63a rcd in if I'm feeling keen.

Haha righto good point. You might want a beer from the second brew, the first may not work out lol. Watching the footy tonight but did a bit yesterday. Finished off the 7 segment displays and started to tidy up the cables. Everything buy the temp probes and float switches has been ran. I'll...

To kind mate. How about a couple of bags of hops off Steve? More than happy to do that mate.

Absolute champion! What can I give you for it mate? I can't just take it off you. But yes please, if you could leave it at Steve's that would be great. Thanks very much.

I need a 32.5 or 1" 1/4 hole punch. Green shed has carbide hole saws but it's $80 for the 32mm. Only need to do 3 holes!

Helles has finally come good. Not sure what I did but the head isnt the best after 10 minutes.

Thanks mate. I've never done this much electrical before but enjoying it. Hope I can tidy up the cables enough to look neat n tidy. Still waiting on a few parts they missed to fully complete it but ill continue on doing the 16mm2 twin cable and 63amp rcd in the house. Still plenty to do.

Sussing out the elements over a beer. Need a 33mm punch for the element to fit into the kettles.

Almost finished. Need some more 18 gauge or .8mm2 cable for the LED's. The 7 segment displays look **** hot I recon. Can't wait to fire it up!

1: Zorco - 1x TFMO, 1 x Glad US Ale, 1 x BB Ale, 1 x BB PaleAle 2: hophead2 - 1 x Gladfield ale malt, 1/2 bag Gladfield Munich malt, 1/2 bag Gladfield pilsner malt 3: Bridgey23 - 1 x Gladfield Ale 4: scooterism - 1 x Gladfield pilsner 5: 2Cranky - 2 x TFFMMO, 1 x Weyerman Pilsner, 1 x Gladfield...