Search results

Aussie Home Brewer

Help Support Aussie Home Brewer:

  1. T

    GUTEN

    I would think exactly that what you said.
  2. T

    GUTEN

    4L seems to be quite much. How do you measure the dead space? Everything together with the pump and pipe what is under the lower mesh cover (bottom mesh cover?). Basically I do not think that it matters that much? Only for calculation of the mash in volume and grain ratio calculation - but...
  3. T

    GUTEN

    I think the grainfather absorption is around 0.6-0.7 and the beersmith default is 0.96. this will change your sparge volume which will result in less volume after all. The boil off from different profiles is from 1.6 to 2.9 I can see, which is a big difference :)
  4. T

    GUTEN

    did you guys updated the beersmith profile or the one from few pages back works fine? :)
  5. T

    Some PCBs for ArdBir and CraftBeerPI

    Hi, I have currently craftbeerpi 3.1 (smaller board which fit nice with PiZero / W) and 5.0 for ardbir I think I have few left 1.3 latest version i do not use whatsapp
  6. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    Right, so you did it with logic FETs for SDA SCL signals? I think you could skip that and still power the LCD with 5V although 3v3 works also for LCD. BrewPiLess is working great actually, at the beggining heat and cool is working almost all the time switching on and off to stabilize...
  7. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    oh ok I know Vito and Brewmaniac and BrewPiLess and I have boards for both using Wemos D1 and also one from robotdyn. Works pretty nice now. There is this dutch guy who is also working on soft for ESP. Do you use I/O extender in your board?
  8. T

    Some PCBs for ArdBir and CraftBeerPI

    Hi, I have for sell some PCBs for ardbir and craftbeerpi whcih I developed and printed. I have only few left and they are not in production or anything, just getting rid of what I have and I will not use anymore. ArdBir - 12$ shipped worldwide as a letter CraftbeerPi small 3.0 - 10$ big 4.1 -...
  9. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    Can you say something more? Are you developing new firmware for this or are you using one existing? ESP board?
  10. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    I think I was posting it here already but it is here: unfortunately forum is in dutch http://www.hobbybrouwen.nl/forum/index.php?topic=31472 but software itself is english and some desc is in english :) https://github.com/mbroek/MBSE-ArdRims
  11. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    You can find it here: https://github.com/terragady/ArdBir All you have to do is dowload and flash via Arduino IDE. Also there is a nice software better than ardbir from netherland guy if you are interested
  12. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    @lael ups, I have a signle heatsink which is exactly same size as SSR. I will have to figure something out :) thanks for help!
  13. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    How SSRs are attached to heatsinks? Is there a space between ssr metal plate and heatsink or you covered it somehow? I am doing a new build and I do not have space for heatsink inside but I am not really shure how I can put it outside that way that all metal plate from SSR will touch heatsink.
  14. T

    BrewPiLess. BrewPi on a single Wifi board.

    OK got it :) well actually I am in Norway now for years and it suppose to be even colder than Poland but it isn't!! We do not even have much snow, only yesterday it covered a little with white dust. I hope it's coming!! :)
  15. T

    BrewPiLess. BrewPi on a single Wifi board.

    How is the temp control made here? Is it PWM or just ON/OFF? Can it control a power of cooler and heater or just 1/0 signal?
  16. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    OK so it is ON/OFF, so only active buzzer. The one I pasted is piezo as well. I guess you can use also just piezo or passive buzzer but will need to change a code for PWM signal, thats completely unnecessary probably and one will have to use passive buzzer only (or just piezo). So now I look at...
  17. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    hi which buzzer should one use for the build? Active or passive? Something like this is fine...
  18. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    You can use this software https://github.com/mbroek/MBSE-ArdRims it is more optimized and no problems with language, characters etc
  19. T

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    are you using any relay which is not SSR? This might cause the problem.
Top