Recent content by Scott_H

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    Balter IPA Clone

    Thanks Mate that looks like a very solid base recipe! I'll do some research and try find what hops they use. I assume this is for a 21L batch? Cheers
  2. S

    Balter IPA Clone

    Hi, Just throwing this out to the masses... has anyone got a AG clone recipe of Balter's IPA? TIA
  3. S

    Brewer's Friend Premium Membership Giveaway

    Tilt integration would be awesome!!!
  4. S

    Kegerator pouring issues

    A massive thank you to everyone who posted on this thread, a Combination of the following has resolved the issue: New shank Increased serving pressure to 70kpa and let it stabilize over a week and burped the keg. Next pour was a clean pour with no foaming!! You are all legends!
  5. S

    2 Birds Sunset Ale recipe

    Awesome thanks mate! Not extract but I can have a play from here!!! Legend!
  6. S

    2 Birds Sunset Ale recipe

    Hi Fellas, Has anyone got a 2 Birds Sunset Ale extract recipe. Great beer looking to clone it!
  7. S

    Kegerator pouring issues

    OK so Keg king have told me their standard line length and pressures; so for 5mm line they recommend 3.5m of line at a pressure of around 12-13 PSI (70-80kPa). I now have a 2nd beer ready and in a keg which I am carbing a lot slower, while still slightly under-carbed (flatish) it poured...
  8. S

    Kegerator pouring issues

    It must be an optical illusion. The line is definitely 5mm, it's stamped "keg king 5mmx8mm" Good idea re the standard setup. I've contacted keg king now to see if they will tell me what their setup. (Let's see if they will actually tell me).
  9. S

    Kegerator pouring issues

    Thanks, I must admit I'm getting a little frustrated with this and the wasting of good beer!!! Are there any other signs of overcarbing as the beer doesn't taste over carbed if anything it tastes slightly under carbed (I don't think it's over carbed but not positive)? But I could be losing carb...
  10. S

    Kegerator pouring issues

    I have it sitting at 60 kpa (9 Psi) at the moment about to try it at 40kpa (5psi)
  11. S

    Kegerator pouring issues

    Sorry guys I ended up out all of yesterday and today. I'm now not sure whether to increase the serving pressure, shorten the lines? I wont get to try until later this week as i am a way for a couple of days for work. When I get back ill try my serving pressure at a very low pressure and shorten...
  12. S

    Kegerator pouring issues

    Here is a pic of what i am seeing in the line
  13. S

    Kegerator pouring issues

    Thanks, I did 200 Kpa for 48hrs then backed it off and have tried 10/20/30/40 kpa to get a decent pour with no determinable difference. The fridge is set to 2 Deg C. Font and lines are definitely cold, only the tap which is slightly warmer, i would expect to have the first tiny bit be a bit...
Back
Top