Recent content by Rex

Cobalt drill bits/holesaws are the way to go with stainless steel. You want to go as slow as possible with as much pressure as you can put on. And use lotsa cutting oil or similar. If things start getting hot, stop for a break. As it's the heat the hardens the SS.

Nasty to keep clean though. Have you seen this article: http://blogs.homebrewtalk.com/Brewpastor/J...le_for_Zymurgy/

I don't have the space for a cool room. And already have some gear I can use for doing the liquid cooling. So jacketing is really the only option at the moment.

Yeah, I'm interested... How will you do the jacketing? One conical inside another i guess?

Cool stuff! Where did you get to with the fermenters? My dream is to have a 100L jacketed conical or two ;-)

I wouldn't recommend messing with the glass door. As they are usually double glass with a vacuum in between. So cutting it will likely cause it to shatter or just fall to bits when you try and mount the taps solidly. Also the other reason they are double glass vacuum sealed is for better...

Haha, Actually built most of this nearly 2 yrs ago... mostly inspired by stuff here and morebeer.com :D FYI, I drilled all the holes in the pots for the taps/thermometers/thermo wells/heat exchanger then took it to a pro tig welder in Dandenong(Melb) and got them to weld in the SS threaded...

Thanks! I set this up a while back. But the sight glasses sit between the pot and tap using an adaptor. The down side of this that the sight glass is not accurate when the tap is open :-( If can get motivated to drill a new hole and take my pots to the welding shop again I'll move it. BTW...

I have the 98L Robinox SS pots from allQuip and they're top quality. The base is nice and heavy for good even heat. Dimentions are aprox, 50cm x 50cm.

Have the same thing here, using a normal low pressue reg, works great for big 80L+ boils!

I have used liquid yeast without a starter many times and not run into trouble. If you don't have time to plan your brewing day so far ahead, it will work. Couple of tips for a first timer are to make sure you actually pop the nutrient pack inside! As the first time I used liquid yeat I was...

Anyone know if those Bernzomatic oxygen cylinders are available in Aus? I've seen propane and MAPP one at Bunnings, but not oxygen.

Interesting, from what I gathered from the unfriendly brewer, the beers on tap which I had would have been force carbonated in the keg VS the bottled which would be naturally carbonated in the bottle. Regardless, it's pretty shit that you get under-carbonated beer for the price they charge...

Hey there, I visited the Red Hill brewery over the easter weekend with a bunch of mates who like beer but are not hard core AG brewers like me. From my perspective it was both good and bad. The Good was the beer! Which is important. And the bar girls were professional and friendly. The Bad...

Looks interesting! How much are they? and do G&g have them in stock? Might pay them a visit tomorrow...