Recent content by PeteQ

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Braumiser

    Braumiser

    Ghetto braumeister
  2. P

    CraftBeerPI Brew Controller

    If your fermenting chamber and brewing setup are next to each other i believe you should be able to.
  3. P

    CraftBeerPI Brew Controller

    It hasn't been implemented yet but apparently will be - https://github.com/Manuel83/craftbeerpi/issues/121 If you like the idea of wifi//web based controller you could give this code a crack - https://github.com/vitotai/BMESP8266 Not nearly as polished as CBP but looks like it's based on Open...
  4. P

    BrewPi Spark V2

    Hi Neal I removed an STC1000 out of an adaptable box and installed all the bits in there. I haven't neatened everything up yet as I'm still waiting on an I2C 20x4 LCD but I've not made my mind up yet whether I'm going to install it in the box or not. It's as easy as looking at your phone to see...
  5. P

    BrewPi Spark V2

    If you are willing to build something from scratch I'm currently using this - https://github.com/vitotai/BrewPiLess See this post - http://aussiehomebrewer.com/topic/92015-brewpiless-brewpi-on-a-single-wifi-board/ I had most of the bits laying around so cost was for a D1 only. Quite easy to...
  6. P

    CraftBeerPI Brew Controller

    As far as I'm aware the pump is completely manual at this stage. I believe there is a lot of code that still needs to be integrated/developed into version 2.2, hopefully this will come with time. Still working on getting the LCD code to work - https://github.com/Manuel83/craftbeerpi/issues/45...
  7. P

    CraftBeerPI Brew Controller

    This morning i finished my first brew with craftbeerpi in a modified matho controller. I jumped in the deep in and tried out v2.2 straight off the bat which was probably a mistake but got through the brew and should still have very drinkable beer in a couple of weeks. After around 4 years of...
  8. P

    Show Us Your Tap Handles

    Shoobs i had a look at their site as well and couldn't find them, if you go into the timber section there are a few different sizes to choose from. I drilled out the bases, as straight as possible, and threaded in some 10mm threaded rod. I then used my battery drill as a sort of lathe to easily...
  9. P

    100l sspots

    here - http://www.craftbrewer.com.au/shop/details.asp?PID=4769
  10. P

    WTB hop rhizomes

    These guys sell hops, they are cascade - http://www.diggers.com.au/shop/product/WHOPA/HOPS%20AMERICAN%20CASCADE.aspx
  11. P

    Sydney Floor Malted Barley EOI

    How did i miss this? I'm in! barls 1 bag mb squared 1 bag Nick R 5 bags ducatiboy stu 4 bags Mattfos01 1 bag Fat ******* 1 bag. Dunkelbrau 1 bag Roastin 1 bag Stuster 1 bag tgiacomelli 1 bag Blind Dog 1 bag tonymc 1 bag Josh 2 bags redb 1 bag Aussiebrewer 2 bags 5150 1 Bag zwitter 1 bag...
  12. P

    STC-1000 Custom Open Source Firmware

    This will work - http://www.ebay.com.au/itm/Latest-UNO-R3-development-board-DCCduino-UNO-R3-compatible-for-arduino-EW-/261528526960?pt=AU_B_I_Electrical_Test_Equipment&hash=item3ce450a070
  13. P

    STC-1000 Custom Open Source Firmware

    Moad grab some leads and a female header from jaycar or similar to make life easier for you. It is extremely easy to flash, but once flashed the firmware isn't all that easy to navigate and use. I always have the manual handy in the brewery. I would be happy to flash anyones correct STC in Sydney?
Back
Top