Recent content by pcqypcqy

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. pcqypcqy

    KegLand.com.au... whata ya got?

    I'd like to see those: SS ball locks 58L Kegmenters (Kegland mentioned) Glass Carboys (for aging Sours) Wide range of Yeast & Bacteria 15A and above components for e-brewery builds Bring back Nathan Kegmenters with 6 inch triclover lids. Spunding valves that some with a gauge at least to 30 psi.
  2. pcqypcqy

    Using a Kombucha SCOBY with beer wort.

    So you're still aiming for a 'beer' as we know it, i.e. hopped, boiled fermented wort? The approach there is pretty close to how a kettle sour is done. If you were aiming for a more kombucha like drink, I would let it go and drink it when you've reached the desired level of kombucha-ness. As...
  3. pcqypcqy

    All grain beer kits

    Nothing wrong with this approach at all. If you're interested in learning a bit more about the recipe, ask the shop to provide the ingredients list. It'd be a pretty rubbish LHBS that wouldn't put one together for you. Most shops I've dealt with are falling over themselves to provide advice...
  4. pcqypcqy

    Mash out

    RDWHAHB
  5. pcqypcqy

    DIY Kegmenter

    I don't mind the valve, I just wish it was more adjustable and came with a gauge that covered the required range. Spunding valves are not strictly sanitary so having one built in could be problematic. I like being able to remove it and pull it apart for cleaning.
  6. pcqypcqy

    DIY Kegmenter

    2 bar is 29 psi which is more than enough for brewing purposes. Will let you fully carbonate most styles at warm temperatures and then cold crash.
  7. pcqypcqy

    DIY Kegmenter

    I do double batches (10 gallons) and find the 50 litre kegmenter is fine. What I'd prefer is a bigger tri clover fitting on the roof. I understand there'd be a cost difference but if that thing was 6 inches rather than 4, I could get my arm in and clean the thing properly. Not sure if that's...
  8. pcqypcqy

    Tamworth January 2018

    When I lived there a while back the bowls club had New England Brewery on tap. They have a stall they travel with so I'm sure you'll see them somewhere around town during the festival. There was a decent craft beer bar called The Welder's Dog in Armidale, and I believe they opened one in...
  9. pcqypcqy

    Using a Kombucha SCOBY with beer wort.

    Give it a shot and post the results! I'm guessing it would be very similar to kombucha, just with a malty twang. Maybe like a malt vinegar.
  10. pcqypcqy

    Ebay, Gumtree and FB Marketplace

    Brigalow had a decent ginger beer flavour, but it was coupled with an awful harsh extract-kit / artifical sweetener flavour.
  11. pcqypcqy

    Ebay, Gumtree and FB Marketplace

    You would be surprised at how many markets I have seen this at, and how many people are drinking the bottles. The ones I've tasted were definitely Brigalow.
  12. pcqypcqy

    new to brewing got question ,stc1000 fridge problem

    You can get an inkbird controller that's fully wired up, you just plug in the plugs and set the temperature and it works. They do sell that un-wired one which sounds like you have. No issues with it, but it takes some knowledge of wiring to make it work. Some people enjoy the hobby/challenge...
  13. pcqypcqy

    new to brewing got question ,stc1000 fridge problem

    Yeah, I think having a plug and play set up is the way to do it. Let's you move it around and use it for other things as well if required.
  14. pcqypcqy

    100 litre 3v electric brewery build

    If you're going stainless sheet over it anyway, the domestic regs for splashbacks around stove tops is just some FC sheet with stainless sheet over. If you did that, you'd be absolutely pissing it in. FC sheet costs nothing, just liquid nail it to your plywood and then cover with stainless as...
Back
Top