Recent content by pbezza

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. P

    Matho's controller

    Is your hand or any other object resting against the LCD pin solder points whilst it is running?
  2. P

    iSpindel Digital Hydrometer

    Put an esp8266 wifi repeater above your fermenter https://github.com/martin-ger/esp_wifi_repeater
  3. P

    BrewPiLess. BrewPi on a single Wifi board.

    In my previous post is a link to the homebrewtalk thread and post with download https://www.homebrewtalk.com/forum/threads/yabc-yet-a-brew-controller-brewmaniacex.596907/page-7#post-8509633 Github code plus manual here https://github.com/vitotai/BrewManiacEsp8266
  4. P

    BrewPiLess. BrewPi on a single Wifi board.

    It's not economical to send them outside of Australia. Cheaper to order from JLCPCB as they charge £7.20 with shipping for 10 PCBs.
  5. P

    BrewPiLess. BrewPi on a single Wifi board.

    I have 7 BrewPiLess/BrewManiacEx PCBs available if anyone wants one. PCB is V1.1 from RollE2K on Homebrewtalk https://www.homebrewtalk.com/forum/threads/yabc-yet-a-brew-controller-brewmaniacex.596907/page-7#post-8509633 He made a tweak with the silkscreen for the esp8266 on v.1.11. The layout...
  6. P

    The Brauduino (Matho’s Controller) Buy thread

    They are just the PCB with no electronic components. You'll need to solder on a few resistors, transistors, diodes, screw terminals etc. You'll also need a case, lcd, relay, arduino uno, buttons, buzzer, ssr, heatsink, ds18b20 probe, pump, etc. The BrewManiacEx has a few more components than the...
  7. P

    The Brauduino (Matho’s Controller) Buy thread

    I have 9 Ardbir PCBs and 9 BrewManiacEx PCBs.
  8. P

    Matho's controller

    Brewmaniacex is a fork of this controller but runs off an esp8266. It has the same LCD and menu structure and also has a web interface. It has a few extra features and the project is still active. Hit up the developer to add or tweak features. https://github.com/vitotai/BrewManiacEsp8266
  9. P

    The Brauduino (Matho’s Controller) Buy thread

    Wireless GUI possibility?? Stumbled upon this http://www.miupanel.com/en-us/Overview
  10. P

    Braumeister NEXTGEN Build

    Recently bought an aluminium 37.8L pot with inner sieve from BCF eBay store for $83.99 including delivery. Have used it only once in a biab setup so far. Am using a 2200W kettle element out of a $9 Kmart cordless kettle and had to bash a dent in the sieve to make room for it. Just need to make...
  11. P

    Test run with my home made Brew controller

    Okay, I wonder why I haven't seen anyone incorporate it into their Mathos or similar mash arduino controllers at this stage if it is so easy to implement. They would be super cheap to implement compared to spending $10 or more on momentary buttons. I've read about people using plain/coloured...
  12. P

    Test run with my home made Brew controller

    Found compatible arduino capacitive touch here http://www.pjrc.com/teensy/td_libs_CapacitiveSensor.html
Back
Top