Recent content by crowmanz

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. crowmanz

    KegLand Questions and Answers

    @KegLand-com-au bumping this one too please
  2. crowmanz

    KegLand Questions and Answers

    How's the design update for the mini benchtop kegerators going? I've been wanting to change my current setup but have been holding out for the mini benchy.
  3. crowmanz

    ANHC 2024 - Brisbane November 1st & 2nd 2024

    ANHC is coming to Brisbane in 2024! A celebration of brewing and all things fermentable. Held at South Bank TAFE, November 1 - 2, 2024 Brisbane QLD This year’s theme is Sunshine & Sustainability We have a fantastic lineup of speakers from across Australia and the globe covering all things...
  4. crowmanz

    KegLand Questions and Answers

    Kegland don't make the brewbuilts, they are the Aussie distributor. Talk to morebeer.
  5. crowmanz

    KegLand Questions and Answers

    6th (8L) and 26th (4L) this morning. Best wait to pounce on the email notification I guess. @KegLand-com-au any plans to add a protective base to the 8L pet kegs like the 20L has got? 4L probably less needed.
  6. crowmanz

    Tap cocktail through icebank

    Is the keg itself warm? You will need much higher pressures to get the CO2 dissolved into a warm keg. E.g. beers I serve at 10-12psi in a kegerator often go up to 30psi+ when serving from a warm keg through a jockey box just to maintain the carbonation level.
  7. crowmanz

    SS Brewtech 10 Gallon Kettle with Apuro Induction Hob

    I'd be concerned about the maximum weight limit on the induction plate of 30kg, the 10 gal pot is ~7kg that leaves 23kg. If you can make something to take some weight on the overhang you might be ok.
  8. crowmanz

    KegLand Questions and Answers

    I know the 4L ones recently got pushed back from end of December to end of Jan recently
  9. crowmanz

    KegLand Questions and Answers

    How is the design of the mini kegerators going @KegLand-com-au ?
  10. crowmanz

    King Keg

    We all know employees get early access
  11. crowmanz

    King Keg

    Did you email Kegland or KegKing? The ones in this thread at KegKing. Kegland were working on bags that were to go inside corny kegs (with a new lid) but ran into burst issues on some scenarios and looks like it was put on the back burner.
  12. crowmanz

    Brewtools Miniuni

    Specs on the website have it as Operating pressure 1 bar / 15psi and Max pressure rated 2 bar / 30 PSI I think the previous posters issue might have been that they just don't come standard with the pressure kit?
  13. crowmanz

    KegLand Questions and Answers

    The G40.1 or the G40? The G40 has inbuilt pumps and seems suited to fermenters. The G40.1 seems more suited to fonts and inline beer chilling. Fermentation Glycol Chiller with Digital Control | 4 Pump Model | G40
  14. crowmanz

    Brewtools Miniuni

    I like the extent of the jacket too, I was keen on a couple other standard stainless jacketed fermenters like the brewbuilt X2 and the ss brewtech unitank 2.0 but I wanted the flexibility to be able to use the same uni to ferment single batches and double keg batches as required as I usually...
  15. crowmanz

    Brewtools Miniuni

    Wow a bit fired up. How is it not able to hold pressure? Many other fermenters are sold without the accessories to do pressure fermentation. Same goes for thermowell options. Then the handles, I don't know of they designed for carrying while the miniuni is full or not but this is the same with...
Back
Top