Recent content by Budbongo

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    KegLand Questions and Answers

    I have re calibrated the external probe again (twice) using water at 0deg and 100 deg. Still getting a 1.5deg difference between the external probe and pill at 20deg. External probe is stuck to the outside of the fermzilla and covered in bubble wrap. Not sure what else I can do.
  2. B

    KegLand Questions and Answers

    I don't have access to the temp controller or the pill for a few days, will experiment more when I do. Please note the pill was in the water (in a fermentation fridge) for about 48 hours (and charged up) before I began the tests. Will try & calibrate the thermapen when I have access, but as you...
  3. B

    KegLand Questions and Answers

    RAPT temp controller. I'm having an issue with the differences in the readings of the inbuilt probe and the pill. Have both in the same water container and the inbuilt probe is constantly reading 2deg C cooler than the pill. My thermopen confirms the pill reading within .1deg. This is for...
  4. B

    KegLand Questions and Answers

    OK, have access to the pill now. Have changed the bluetooth transmissions, but the minimum transmission period is .33 / minute which I guess is 20 sec. Appears to be working ok now. (is there any way to change the transmission unit to seconds rather than minutes?)
  5. B

    KegLand Questions and Answers

    RAPT temp controller issue I purchased a RAPT pill a couple of months ago, set it up but haven't been able to use it as my brewery is in a remote location and I had no internet. I now have internet and have also purchased a RAPT temperture controller. I set everything up, took a few resets to...
Back
Top