Recent content by buckerooni

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. buckerooni

    magnets inside fermenter - Neodymium no good?

    the idea is to control hop contact time in the wort with no O2 ingress. with certain ferments, I find sometimes it takes multiple extra days to pass the diactyl test, and I want to ensure I can control hop contact time and mean you can experiment with early ferment VS late ferment dry hopping.
  2. buckerooni

    magnets inside fermenter - Neodymium no good?

    what kind of metal disc? none of my stainless washers (316) would work.
  3. buckerooni

    magnets inside fermenter - Neodymium no good?

    yep that's the link! I think it's a great mod, I only use it for dumping yeast and it's a bit questionable about reusing the yeast, it does get a bit errr....squirty.... but I haven't spent any time trying to solve that problem yet. I used QD fittings, so a collection bottle with a QD fitting...
  4. buckerooni

    magnets inside fermenter - Neodymium no good?

    thanks for the info, have ordered these teflon coated discs - https://magnet.com.au/neodymium-disc-25mm-x-2mm-teflon-coated.html. will keep the existing ones out of the wort!
  5. buckerooni

    magnets inside fermenter - Neodymium no good?

    So I got these, https://www.bunnings.com.au/everhang-12mm-rare-earth-disc-magnet-6-pack_p3690099 but see in other threads it's recommeded ones with teflon, like stirbars. what's the issue with Neodymium ones, corrosion? as I will have up to 150g of hops in a bag, I'll probably go with...
  6. buckerooni

    No Frills low cost pressure fermenting

    being able to ferment from a chest freezer was also something that's not really been too easy, that was one of the reasons I ordered a couple! plus, xmas, spunding valve, whatever else I need to convince myself that I need this.
  7. buckerooni

    maltmuncher - 0.100 = 1mm?

    thanks fellas, yeah, gotta be imperial! Just slighlty annoying as it's a KK mill, and there's no unit marking :/
  8. buckerooni

    maltmuncher - 0.100 = 1mm?

    been struggling with efficiency, then I borrowed a 20L brau, and payed a bit more attention to my milling. I've got a 2 roller KK Malt Muncher with a ozito drill running it slow. Following the Brau instructions noticed having it set to 0.100 (I assume is 1mm) was doing basically nothing! lots...
  9. buckerooni

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    has anyone got some of the power sockets I can buy? I'd take 1 but would have 2 if you've got them. I can find them on ebay ( https://www.ebay.com.au/itm/CNLINKO-3-Pin-Connector-Plug-Socket-Waterproof-IP67-Compatible-w-Neutrik-M24/122544821030 ) , but to get one posted quickly it's gonna cost...
  10. buckerooni

    Fermzilla

    one of those stainless QDs with a 90 deg thread would give u a bit more room too. I put some beer line between the QD and the valve
  11. buckerooni

    Matho's controller

    blue wire from the power input, got a sparky mate who will look into this for me, hopefully the rest of the unit is still OK.
  12. brauduino

    brauduino

  13. brauduino

    brauduino

  14. brauduino

    brauduino

  15. buckerooni

    Matho's controller

    after 50+ brews with my trusty Brauduino, was doing a test run with my new Coolossus counterflow chiller and some PBW ramping to 80c and looked around and instead of seeing a blue backlight I saw an orange flame! shiiiiiite! switched off the 2 x 20amp plugs. Checked the temp of the top of the...
Back
Top